Recent Posts

Pages: 1 2 [3] 4 5 6 7 8 ... 10
21
Programmer's Help / 0.699[D] build 78
« Last post by PPK on 31 October, 2011, 04:32:36 »
Binary with debug file (32-bit and 64-bit)
Source

Quote from: Changes from build 76
Added: IPv6 support for windoze XP.
Added: Scope id support for link-local IPv6 addresses.
Other: Few minor fixes.

I'm running test hub with IPv6 enabled on address dchub://ipv6-test.czdc.org :rolleyes:
22
Pomoc programatorum / 0.699[D] build 76
« Last post by PPK on 15 October, 2011, 22:14:31 »
Program vcetne debug souboru (32-bit and 64-bit)
Zdrojacek

Quote from: Zmeny od buildu 9
Pridano: Podpora IPv6.
Pridano: IP64 a IPv4 rozsireni protokolu.
Pridano: Podpora pro IPv6 databazi statu.
Opraveno: Hledani jine bezici instance.
Opraveno: Formatovani parametru v nekterych pripadech.
Opraveno: Chybny kurzor v pripade ze byl cursor prilis blizko splitteru ale ne primo v jeho oblasti.
Zmeneno: BuildNumber z integer na string.
Zmeneno: Podpora Zlig c->c konekci je vzdy posilana.
Zmeneno: IPv4 databaze statu z ip-to-country na IP to Country.
Vylepseno: Funkce klaves tab a enter v seznamu vysledku hledani.
Vylepseno: Supports string neni vytvaren pri kazdem spojeni, ale uz pri spusteni -> setreni cpu.
Vylepseno: Supports string neni vytvaren pri kazde c->h konekci, ale uz pri spusteni -> setreni cpu.
Ostatni: Par drobnych oprav a optimizaci.

IPv6 funguje jen na windows Vista a vys, jednoduse proto ze podpora na starsich windows je spatny vtip :laughing1:

Od teto verze je pouzivana jina databaze statu. Je ke stazeni na http://software77.net/geo-ip/ ::) Pro IPv4 je potreba IPV4 CSV (gz) a pro IPv6 je potreba IPV6 Range (gz). Rozbalit do slozky s konfiguraci CzDC ;)

Mam spusteny testovaci hub se zapnutou podporou IPv6 na adrese dchub://ipv6-test.czdc.org :rolleyes:
23
Programmer's Help / 0.699[D] build 76
« Last post by PPK on 15 October, 2011, 22:04:55 »
Binary with debug file (32-bit and 64-bit)
Source

Quote from: Changes from build 9
Added: IPv6 support.
Added: IP64 and IPv4 protocol extensions.
Added: Support for IPv6 IP to Country database.
Fixed: Searching for other instance.
Fixed: Parameters formating in some cases.
Fixed: Invalid cursor when cursor is too close to splitter but not in splitter area.
Changed: BuildNumber from integer to string.
Changed: Zlig support in c->c connection is always sent.
Changed: IPv4 country database from ip-to-country to IP to Country.
Improved: Tab and enter key handling in search results list.
Improved: Supports string is not generated on every connection, but is created on startup -> cpu saving.
Improved: Supports string is not generated on every c->h connection, but is created on startup -> cpu saving.
Other: Few minor fixes and optimizations.

IPv6 is working only on windoze Vista and higher, simply because support in older windoze is bad joke :laughing1:

From this version different country databases are used. You can download them on http://software77.net/geo-ip/ ::) For IPv4 you need IPV4 CSV (gz) and for IPv6 you need IPV6 Range (gz). Unpack them to CzDC config dir ;)

I'm running test hub with IPv6 enabled on address dchub://ipv6-test.czdc.org :rolleyes:
24
Otevrena diskuze / Re: Nastaveni limits stahovani CZDC
« Last post by PPK on 24 May, 2011, 12:13:48 »
Vsechny funguji spolu... odpojit download pokud je rychlost pod nejakou hodnotu vic jak x minut a vsechny downloady nebezi rychleji nez y kB/s a velikost souboru je vetsi nez z MB  :rolleyes:
25
Otevrena diskuze / Nastaveni limits stahovani CZDC
« Last post by TheAzachiel on 24 May, 2011, 06:54:30 »
Zdravim,

Mohl by mi prosim nekdo vysvetlit nastaveni v CZDC/Advanced/Limits?

Prvni dva radky chapu, odpojit, kdyz je rychlost nizsi nez XX, po dobu XX minut, ale ty druhe dva mi nejak unikaji. Jestli take funguji spolu, jako prvni dva nebo jak?

Diky.

PS: Omlouvam se, poslal jsem to dvakrat, ale nevedel jsem, ze server nebere CZ diakritiku. Po prvnim ceskem znaku to ukouslo cely zbytek textu.
26
Help @ Support / Re: Problem
« Last post by PPK on 08 April, 2011, 03:57:16 »
Easy way is to allow all TCP/UDP IN/OUT for CzDC in firewall. Or all TCP/UDP OUT and TCP/UDP IN to ports that you set in Settings->General->TCP/UDP :rolleyes: Another problem can be if your IP change every day, then you try to leave box for IP in CzDC Settings->General empty and CzDC should detect it on startup.
27
Help @ Support / Problem
« Last post by Olda on 07 April, 2011, 20:48:39 »
Hello,
I have a small problem with CZDC. I downloaded CZDC and allowed to run through the firewall. Everything is ok, people can download from me and I from them. But when I turn off my computer and then turn on the second day I can not connect to anyone. But when I delete an exception in the firewall and allow once smore and restart the program then everything runs perfect. But it's a impractical to do every day  :D. Does anyone know how to set as the program runs fine every day?
Thanks you for your replies.

PS: I have Windosws 7 64-bit.
28
Programmer's Help / Re: 0.699[D] build 9
« Last post by swede on 04 April, 2011, 22:28:13 »
Works like a charm here!
Great job, thank you!  :yes:
29
Open Discussion / Re: 0.699[D1]
« Last post by PPK on 26 March, 2011, 19:35:03 »
Sorting should be fixed, and few more things in update http://www.czdc.org/forum/index.php?topic=3785.0 :rolleyes:
30
Pomoc programatorum / 0.699[D] build 9
« Last post by PPK on 26 March, 2011, 19:33:44 »
Program vcetne debug souboru (32-bit)
Program vcetne debug souboru (64-bit)
Zdrojacek

Quote from: Seznam zmen
Pridano: Cislovani buildu.
Opraveno: Nefunkcni ignore na zpravach ktere jsou zpravamy o vyhozeni.
Opraveno: Pad pri spatnych parametrech v uzivatelskych prikazech, adl hledani, winamp spamu atd (diky Mathias Thorell za nahlaseni).
Opraveno: Pad v klient-klient spojeni kdyz ADCGET je obdrzen pred MyNick (diky bodeaga za nahlaseni).
Opraveno: Nespravne razeni ve sloupcich v okne hledani v nekterych pripadech (diky Swede za nahlaseni).
Odstraneno: MyINFO pred GetNickList prihlasovaci sekvence, prestoze je to mnohem logictejsi nez opak tak to z neznameho duvodu tvurci hubsoftu znemoznuji :(
Pages: 1 2 [3] 4 5 6 7 8 ... 10